Product Description
Solenoid Valve(Motor Type)
· This Solenoid can be fitted with the common controllers for automatic irrigation system.
· Actuator motor designed for converting electric to hydraulic command which is essential part for Hydraulic controlling valve.
· Three version AC (DC) and DC Latching available, AC and DC version is 2 in 1.
· NC (Normally Closed) and NO (Normally Open) two modes available for selection.
· Designed with diaphragm inside which makes controlling main part separate from water passageways for long service life.
· Width water passageways designed for short reaction of controlling valve and anti-clogging.
· Manual controlling knob for CLOSE-AUTO-OPEN operation.
· 3-way hydraulic base can be fitting for the Hydraulic controlling with 3 position 2 way.
· Very low energy consumption for long distance control with long wire.
Technical Data
· With 100cm Wires
· Filtration: Min. 80 mesh
· Pressure range: 0-10bar (0-140 psi)
· Hydraulic ports connecting: 1/8" BSP
· Max. fluid temperature: 60ºC (140 ºF )
· Max. ambient temperature: 60ºC (140 ºF )
· DC Latching version: Voltage 9-40V, Pulse width: 80-500ms
· AC (DC) version: Voltage 24V (17-30V), Current Inrush 90mA, Holding 10mA
· DC Latching version has red (positive) wire and black (negative) wire
Company Profile
){kind=link}